How To Build A Cedar Strip Canoe

In this video I explain how I make my inner and outer stems for a cedar strip canoe. Press the bead of next strip firmly into the.

Sht Cedar Strip Canoe How To Build Details

The forms are generally made from 34 plywood with a series of holes around them to install clamps to form the structure of the canoe.

How to build a cedar strip canoe. WHAT IS A CEDAR-STRIP CANOE ANYWAY. The wooden hull by itself is weak but the two layers of fiberglass make the canoe extremely strong lightweight and waterproof. Peters basic procedure for laying a strip was to staple a board into position against the formers lay a thin bead of glue along one edge of the thin plank and then staple the next strip.

The basic idea behind a cedar-strip canoe is to make a hull of narrow wood strips each one glued to the next with ordinary carpenters glue and then cover the hull with fiberglass inside and out. Start attaching strips to the forms at the part of the form closest to the strong back and work towards the center of the hull. The strips are glued together at their edges and stapled to the forms.

The screws attaching the seats should be covered in epoxy to seal any gaps created. For more information on stripping the hull. Other methods include hewing and burning the canoe from a single log.

Thats when I came up with the idea of making my own comprehensive sequential fast paced instructional video series documenting the entire cedar strip canoe building process. The next step after cutting narrow strips of cedar. Seats will be built using hardwood lumber and fixed with screws across the inside part of the hull.

And metal or synthetic materials. In fact the strip canoe is basically a synthetic material canoe but with wood in the laminations -- it has fiberglassepoxy laminations inside and out. You will need to have some woodworking skills or the patience to acquire them.

In this video I explain what you should know before you start building your first cedar strip canoe. The structural parts that are clamped to the forms are first put into a steam box to prevent them from breaking when forming the shape of the canoe. In this new series we discuss the essentials of a cedar strip build.

The seats need to be set as low as possible to lower the canoes center of gravity and ensure stability on water. A budget for reasonably good materials and tools. A place to build it.

Attach with cove side up to hold a bead of glue. And some free time. I cut about 20 strips of white ash 14x34x45.

It was pretty cold that week and it took 3-4 days to really cure. Bark skins or canvas over ribs. The outer hull was fiber glassed with 6 oz cloth double layered on the nose the tail and on the flattish portion on the bottom just so that its more durable when running into things or beaching the canoe.

I just finished building my first canoe and I liked the. Building a Cedar Strip Canoe Its Probably Easier than you Think. You need 12 strips tot.

Glue and staple the ends of the strip to the stems allowing the strip to run past the stem a little.

Building A Strip Canoe Second Edition Revised Expanded Full Sized Plans And Instructions For 8 Easy To Build Field Tested Canoes Fox Chapel Publishing Step By Step 100 Photos Illustrations Gilpatrick Gil 9781565234833 Amazon Com Books