How To Do Vinyl Siding

Cut your siding in lengths with a 14-inch gap for expansion wherever siding butts accessories. Lock the new vinyl siding piece into place with a zip tool.

Vinyl Siding

Allow approximately 132 08mm clearance the thickness of a dime between the fastener head and the vinyl.

How to do vinyl siding. Soffit and Fascia Starting with. All vinyl siding and vinyl soffit and fascia can be cut with tin snips a circular saw with a plywood blade or by scoring it with a knife and breaking it. Vinyl siding installation must allow for material expansion and contraction caused by weather.

Cut the Siding Short. Vinyl Siding Cost. Twist the zip tool slightly to force the leading.

Include a 38-inch gap when installing exterior siding in areas with weather below 40 degrees Fahrenheit. When cutting vinyl siding its usually to go into a corner. Multiply width and height to arrive at the square footage.

Like with removing vinyl siding start at one end of the piece and pull the lip down. You need to leave at least 14. Estimate the Quantity of Vinyl Siding Needed Measure the width and height of the side of the house treating the measured area as a square or rectangle.

Whatever your measurement is take at least 14 or 18 on both sides for the panel to slide back and forth. Choose the Right Nails. Do not exclude window and door.

Tight nailing screwing or stapling will cause the vinyl siding to buckle with changes in temperature Fig. When fastening start in the center of the panel and work toward the ends. Vinyl siding costs around 380 per square footA typical 1500-square foot house will cost around 5700 to side with vinyl siding.

If you dont cut your siding short when.

Yf0apgb6vluttm