Sharpening An Axe

Tools for a L. The first is a Kisa that has hit the ground a couple of times revealing some minor chipping of the edge.

Kme Axe Sharpener

How To Sharpen An Axe.

Sharpening an axe. Something to note. Sharpening your axe with a dremel tool comes with the same issue as using a bench grinder. Tools needed to sharpen an axe are a file a honing stone and a strop.

How To Sharpen An Axe. Be sure to rub the whetstone in small circular movements and flip the axe every time the burr changes sides. When cutting wood frequently stop and run your finger along the edge of the axe to assess its sharpness.

Fortunately sharpening an axe is a fairly simple procedure requiring only a few easily. The following instructions apply primarily to using The Puck but the basic principles explained will apply for other stones as well. Dull axes not only make your work harder they can glance off the wood and cause serious injury.

Axe-sharpening should not be only an annual event. Our stone of choice is The Puck by Lansky Sharpeners. Any time your axe requires a maintenance sharpening it should be followed by a touch-up for desired sharpness.

Do you know the proper way to sharpen an Axe. The axes in question are two Hults Bruk axes. Any tool with a blade is almost worthless unless it is sharp and when it comes to sharpening tools you can do it the hard way the wrong way or the best way so make it easier on yourself.

A worn or damaged blade may bounce or glance off the wood rather than making a clean cut. If you continue doing this for a while the burr will eventually disappear. Do not use a grinding wheel because it can heat up the steel to such an extent it can affect the hardness of the steel.

If you are working too hard to chop the wood this can physically take a toll on you. If you grind too quickly the head will heat up and lose its temper. To sharpen your axe you need a file or coarse diamond-coated sharpening stone.

The coarser the grain the coarser the stone the more material the stone removes. A sharp axe is a safe axe. To sharpen an axe you really only need a fine grit sharpening stone and a strop.

If the ax is dull and its edge unsharpened more strength is needed but skill will bring success. It will be perfect for the maintenance sharpening demonstration. Use brief and intermittent grinds to prevent the head from heating too much.

But if you do not sharp your axe after some time it will eventually happen to lose its ability to render a great service. A flat mill bastard file should be used if your axe is extremely dull or chipped. A dull Axe is no Axe at all.

The Best Way to Sharpen an Axe I remain convinced that the best way to sharpen an axe is the old-fashioned way by hand using simple tools such as a file and sharpening stone. To develop the work rate or timing sharpen an axe is one of the most important tasks. After using the file if needed finish.

There is little risk of damaging your axe like you might with a power tool and it doesnt take much longer either if the axe is even somewhat decently maintained re-sharpening it shouldnt take much longer than 5. It allows your axe to work more accurately and also saves you a lot of time. Sharpen your axe prior to any wood cutting session or at the beginning of fall or winter.

Sharpen the Axes Edge Using a Coarse Whetstone or Water Stone Apply sewing machine or honing oil to the edge before rubbing the tip of a coarse whetstone on it.

How To Sharpen An Axe Council Tool